The Complete Guide to Buying Lift Spare Parts Online

The Complete Guide to Buying Lift Spare Parts Online

Whether you have a mechanic on staff or are hiring someone from outside, they should be able to provide you reliable advise on where to get spare parts and what type of elements to use. It is always worthwhile to invest in high-quality parts, regardless of the type of elevator you have.

The following are the various components of an elevator:

  • Elevator shaft and car
  • Sheave and Motor
  • Unit of control
  • Counterweight
  • Driven by the machine
  • Guide rails for counterweights
  • Fixing bracket for guide rails
  • Railing for automobiles
  • Frame with a counterweight
  • buffer as a counterweight
  • Overspeed limiter
  • Cabinet of control
  • Apron
  • Doors that lead to the landing
  • Pulley for tension
  • Bugger in a car

Shaft and Elevator Car

The elevator was built to be housed within the elevator shaft and used to convey people and various objects to various floors within a structure. Elevators are available in a variety of sizes, all of which include at least one door and are powered by a motor or hydraulic system that pushes them up and back down.

The most frequent are motorized elevators, which are also the most cost-effective in building construction. In addition, the shafts of an elevator contain guide tracks, which the elevator follows when being dragged up and down, and this helps to balance any counterweight, and it is the combination of these two factors that reduces stress on the elevator’s motor.

The Motor and Sheave

Elevators that are motorized are those that are raised and lowered by steel ropes attached to a counterweight and the elevator vehicle. The counter, on the other hand, is designed to keep the weight of the elevator vehicle at 40 percent of its maximum capacity, so reducing any strain on the motor. The pulley is known as a sheave because it has groves in it that allow the rope to be lifted, raised, and dropped.

The motor maintains the sheave (pulley) moving in the right direction, transporting people to their destinations.

Unit of Control

The control unit, motor, and sheave are all situated in the control room, which is usually located near the elevator shaft’s top. This is where the signals from each floor’s controls go to be translated through the system and then sent to the motor to inform it whether to move up or down. When the elevator arrives at its destination, a signal is sent to the control room instructing it to either stop and allow passengers to board or evacuate.

A computer was fitted with software that monitors travel patterns, as well as precise instructions that were encoded into the control unit with resting spots and signal priorities.

Guide Rails and Counterweight

Because the motor is constantly stretched by the continuous lifting and lowering of the elevator (movements that travel back and forth like a child’s seesaw), a counterweight is utilized to reduce stress on it. The elevator is repelled upwards and then downwards by the motor, which works in tandem with the counterweight. Guide rails were built into the construction to protect the elevator and counterweight from swaying, ensuring a smooth journey in both directions.

There are few selected international companies which operates in different countries:

1. Elevator Equipment (UK)


Elevator Equipment Ltd was established in 2002 by Mark Spencer and Chris Moore to provide the lift industry with a new and innovated approach to supplying lift parts and products. They have a long list of catalogue to choose from.

2. Donati (EU)

Donati Company established its reputation either on the Italian as on the international market.

3. Lift solutions (US)


Headquartered in the Pacific Northwest, with supplier partner locations throughout the United States, they provide elevator equipment and components to companies engaged in elevator construction, modernization and repair in North America.

How do I find out if my spare part is compatible with my model of machine?

Although many parts are interchangeable, it is always advisable to purchase genuine branded spare parts manufactured specifically for your machine. The first step is to recognize the machine. You’ll have a far better chance of locating appropriate components if you know what make and model you’re looking for.

The brand of the machine should be obvious most of the time, as most appliances have a permanent brand badge or embossed emblem on the front or top of the device.
Manufacturers can make numerous different versions of the same appliance, with just slight differences between them. The model number aids in locating the correct machine.

The Identification Plate usually has the model number. This is a little metallic plate or sticker that contains much more specific product information. It’s commonly seen on the unit’s side, rear, or base. The plate may be inside the refrigeration compartment in refrigerators and freezers. This plate may have worn away or come off entirely if the machine is particularly old. The identification plate looks like this in most cases.

What are the benefits & drawbacks of buying lift spares online?

1. Convenience

The convenience of obtaining heavy machinery components online is one of the key benefits. Making a trip to the store isn’t always practical, especially if your commute is long and you have important duties at work or on the job.

2. Speed and Quick Turnarounds

When you order online, you don’t have to wait till the store opens or until you have free time to go. You can order the parts you require straight now by going online. Ordering online also ensures speedy response times, ensuring that you don’t waste time due to delays.

3. Intuitive Browsing and Searching

The user-friendly site makes it simple to find what you need by allowing you to search, explore, and order.

4. Extensive Inventory Availability

When you go to a brick-and-mortar store, it may not always have the parts you need. So you end up making a trip and then having to order parts anyway.